How to Boot Into EDL Mode on Xiaomi Phones (2 Ways)

How to Boot Into EDL Mode 

on Xiaomi Phones (2 Ways)  

Hi Guys, I am back again with another simple 

tutorial for the advanced Xiaomi users. In this 

tutorial will see What is EDL Mode & How to 

Boot into EDL Mode from Fastboot Mode on 

your 

Xiaomi Smartphones. There is no need of Deep 

Flashing cable and all those stuff. So, Please read 

the full guide to know How can you Boot Into 

EDL Mode on Xiaomi Phones.

What is EDL Mode?

EDL Mode stands for Emergency Download Mode. It is the Special Mode to granting the higher level of access to the smartphone on your Smartphone. By which you can Unlock Bootloader unofficially, Flash Stock Firmware, Unbrick your device from Bootloop etc.

Quick Preparation:

Install Proper USB Driver of your Xiaomi device. (Get USB Driver here)

Enable USB Debugging. (Guide)

Setup ADB & Fastboot USB Drivers.

Guide works for Xiaomi & Qualcomm Chipset devices only.

1. How to Boot into EDL From ADB

It is easier to boot into EDL Mode from ADB Command. Just follow this simple steps given below.

1. Download & Install ADB Drivers on your Computer.

CLICK HERE

2. Enable USB Debugging on your   
     Xiaomi Smartphone.

TO OPEN CLICK ON DOWNLOAD BUTTON

3. Open Command Window in  Windows Computer.

4. Connect your Xiaomi Smartphone to Computer using USB Cable.

5. Type the following command to check whether the device is connected or not.

adb device.

6. Now, If it shows the device then you use the following command to boot your device into EDL Mode (Emergency Download Mode).

adb reboot edl

That’s it! You will be reboot into EDL Mode with a blank screen. Only Notification LED light will be on indicating you’re in EDL Mode.

2. How to Boot into EDL From Fastboot Mode

1. Download Fastboot EDL File & Extract it on your computer. You will see 2-3 files extracted there.

2. Connect your Xiaomi Smartphone in Fastboot Mode. To do this Switch off your Smartphone first. Power it on (Boot into Fasbtoot) by Holding Power on + Volume Down button until the Mi Bunny Logo appears. You are in the Fastboot Mode now.

 DOWNLOAD FASTBOOT EDL FILE

3.Now, Double click or run the edl.cmd file. As soon as you run this file The Mi Bunny will disappear and your device will get rebooted to EDL Mode with a Blank screen.

So, This was the process to boot to your device in Emergency Download Mode on Xiaomi devices. This method is working for every Qualcomm devices. Hence, You can use this method on the other devices running on Qualcomm Chipset.